A3-1300, A3-1800
"TRIMOS" 3D - Portable articulated arm A3-1300 and A3-1800
Sold 0 items
Precision Linear scales
SG series of Linear Scales are widely used with Sinowon profile projectors, toolmaker microscopes, video measuring machines etc. SG Linear scale has good dynamic performance, great moving speed, and perfect reliability, not only can they meet the requirements of normal shaft dynamic performance, but also the requirements of direct drive equipment of highly dynamic performance.
Sold 0 items
Microscope
OM series all-in-one microscope designed with a screen, small space usage, only need one power cable to work. Installed with 11.6” high resolution screen, with clear image, and screen can lean back to 90°, adjust according operator needs. Optical lens can change from 0.7-4.5x, operator can change to different magnification for inspection, Inside software have function of video observation, take picture, measuring, storing, data output.
Sold 0 items
TIME®5100/5102/5104
Pen Type Hardness Tester TIME®5100/5102/5104 is economically priced and suitable for quick hardness testing on metal materials, especially on-site hard testing of large, non-transportable components.
Sold 0 items
TIME5370
TIME Cloud Platform Leeb Hardness Tester TIME5370 Was Officially Launched. Automatic recording, real-time sharing, convenient service, opening a new era of smart testing. Data sharing anytime anywhere. Automatically record measurement data. Facilitate the traceability of quality control process. IP54 protection. One-key calling, quick submission of reports, service by your side.
Sold 0 items
JB-500B,JB-W500A
It is mainly used to determine the anti-impact capability of ferrous metal materials with high toughness, especially for steel and iron and their alloy, under dynamic load.
Sold 0 items
JB-WE Series
With the rapid development of material technology, to meet the requirement for high efficiency material testing, TIME JB-WE Series with full automatic control and high safety was born to meet this trend.
Sold 0 items
TNS-S-I
This series is mainly used for torsion test of all kinds of torsion springs.
Sold 0 items
TNS-S-L
This series of testing machines is mainly applicable for testing the torsion angle and torque of various kinds ofsmallsized torsion springs, coil springs, elastic components and other friction structures.
Sold 0 items
PWS-E100
This machine is mainly used to make test on Metal / Non-metal materials and other component parts for the Traction / Compression / High-Low frequency fatigue testing experiments. By equipping with different software, this machine is able to achieve all kinds of mechanical function experiments. PWS series Fatigue Testing System is widely be adopted by Aerospace industry, Vessel Production and Military industries for the material fatigue testing.
Sold 0 items
JB-300B,JB-W300A
This machine can be operated semi-automatically. The pendulum of the machine can be raised or released automatically. Be applicable for continuing testing in different kinds of laboratories and other metallurgy industrial manufactories.
Sold 0 items
WAW-300C,WAW-600C,WAW-1000C,WAW-2000C,WAW-3000C
WAW- C Servo Hydraulic Tensile Testing Machine is mainly used for tensile test with high efficiency requirement. Equipped with relevant fixtures, this machine can also be used for compression, bending and shearing tests. Constant strain, Constant stress and constant displacement test are available. Strain velocity, stress velocity and displacement velocity conform to the requirement of GB, ASTM, DIN, ISO, JIS, BS etc. metal tensile testing standards. It is an ideal equipment for tensile test of metal rod, board, screw, steel strand (with special fixture) etc. material with high stiffness.
Sold 0 items
WDW Series
It is mainly for doing tension, compression, bending, shearing, etc. test of metal and non-metal materials. It can be used in all kinds of industries.
Sold 0 items
TIME®7230
TIME7230 is a powerful digital vibration meter. It is suited for measuring vibration of motor, electric fan, pump, compressor and other rotating machine tools.
Sold 0 items
TIME®7120/7122/7126
TIME Vibration Tester 7120/7122/7126 (TV200/220/260) can quickly monitor the vibration status of machine tools.
Sold 0 items
W810-1502-99
Digital Caliper Range 150mm/not output data (S_CAL EVO - Limited edition)
Sold 0 items
A6-12210,A6-12255
Due to the configuration with 480 highperfomance LEDs, the RT STROBE 12000 LED offers a powerful light intensity.
Sold 0 items
A6-7200,A6-7210,A6-7255
Due to the configuration with 200 highperfomance LEDs, the RT STROBE 7000 LED offers a powerful light intensity.
Sold 0 items
A6-5200,A6-5210,A6-5255
Due to the configuration with 120 highperfomance LEDs, the RT STROBE 5000 LED offers a powerful light intensity.
Sold 0 items
A6-3200,A6-3210
Due to the configuration with 80 highperfomance LEDs, the RT STROBE 3000 LED offers a powerful light intensity
Sold 0 items
A4-3505
This extremely robust and precise stroboscope is used to conduct measurements in difficult industrial environments and are specifically designed for maintenance work / commissioning and inspections
Sold 0 items
A4-3550
In order to make use of the laser function you first need to apply a reflective mark on the object to be measured. Point the stroboscope to the rotating object. The rotational speed is measured with the help of the laser beam’s reflection.
Sold 0 items
A4-3500
The extremely bright, hand-held stroboscopes comprising the RT STROBE qbLED range are unrivalled in terms of brightness, operation and technology.
Sold 0 items
A4-3205
With this version of the multi function device - LED stroboscope and laser-tachometer- you can connect your RT STROBE pocketLED LASER T with the device or plant to be monitored via a trigger cable. Switching from internal to external triggering displays the units 1/min or Hz rather than FPM.
Sold 0 items
A4-3005
TWO in ONE – LED Stroboscope and Laser-Tachometer...
Sold 0 items
A4-3200
A wide variety of options for influencing the input signal before the flash is activated enables you to ensure that the flash will be activated in exactly the right position.
Sold 0 items
A4-3000
Cutting-edge, ultra-high performance LEDs and intelligent control electronics play a key role in achieving this.
Sold 0 items
A5-1279
The digital hand-tachometer rotaro Tw with the special adapter Tw has been developed to meet the special requirements for measurement of speed and length within the welding industry.
Sold 0 items
A5-1250
The digital hand-tachometer rotaro Te is a device for measuring rotational speed and velocity, as well as length. The compact device has two measuring methods. One is optical, and therefore non-contacting; the other is mechanical using an adapter and various probes.
Sold 0 items
A5-1100
The digital hand-tachometer redpoint is a compact measuring unit for proximity measurement of rotational speed.
Sold 0 items
A5-1000
The digital hand-tachometer rotaro is just as useful when setting up plants and machinery as during service jobs, monitoring manufacturing processes or in development laboratories. Example applications include measuring the rotational speeds of engines, pumps and turbines, as well as of mixers, centrifuges and conveyors; it can also measure the velocities and lengths of all kinds of sheets and belts.
Sold 0 items
A3-3110 / A3-3510,A3-3100 / A3-3500
The mechanical hand-Tachometers htm are designed to accurately measure RPM and surface speed on a wide range of applications.
Sold 0 items
MU 52 ST - SI
Precision dial gauge (Error Free) (0.01/0.8 mm.) MU52 ST-SI - Shockproof with overtravel
Sold 0 items
MU 52 STd
Precision dial gauge (0.01/10 mm.) MU52 STd - shockproof with Lug back | Metal Bezel
Sold 0 items
MU 52 STc
Precision dial gauge (0.01/10 mm.) MU52 STc - shockproof with flat back | Metal Bezel
Sold 0 items
VM-300
Video Microscope is widely used in observing translucent or opaque material in electronics, metallurgy, chemical and instrumentation industry such as metal ceramic, integrated block, printed circuit boards, liquid crystal plate, film, fiber, coating and other non-metallic materials. Trinocular Video Microscope is also suitable for medicine, agriculture, forestry, public security, schools, scientific research departments for observation and analysis.
Sold 0 items
VM-100
Video Microscope is widely used in the inspection of electronic industry production line, printed circuit board, weld detects ( such as wrong printing, edge collapse,etc)during printed circuit component, PC Board, VFD, and the identification of printing grid and painting, etc. It can display the zoom out image on the screen and save, magnify and print.
Sold 0 items
VM-500Plus
Incoming inspection, production inspection, material research, PCB and SMT inspection analysis, printing, textile inspection, biological anatomy, medical testing and other fields.
Sold 0 items
VM-457
Incoming inspection, production inspection, material research, PCB and SMT inspection analysis, printing, textile inspection and other fields.
Sold 0 items
VM-7513
Video microscope is a fixed frame fixed magnification monocular video microscope, using a unique elimination of stray light and large depth of field technology, with clear imaging, strong stereo and long working distance, wide field of view, etc., and high-definition color CCD and monitor or computer matching use.
Sold 0 items
PH350-2010
Profile Projector PH350-2010 Ø350mm
Sold 0 items
PH400-3015
Profile Projector PH400-3015 Ø400mm
Sold 0 items
VP400-2010
Profile Projector VP400 Series Ø400mm
Sold 0 items
MVS-322A,MVS-432A,MVS-542A
MVS series is a cantilever high accuracy fully automatic vision measuring machine developed for GD&T measurement with three axis automatic motorized control. It equipped with automatic focusing, automatic lighting control, and automatic movement of hardware and software configuration to make the measurement of linear and geometrical dimensions quickly and accurately.
Sold 0 items