wylerLEVEL/wylerLEVEL Frame ±0.001mm/m

wylerLEVEL/wylerLEVEL Frame ±0.001mm/m
Brand : Wyler (swiss made )
---------------------------------------

wylerLEVEL, formerly BlueCLINO High Precision, is a very precise level belonging to the BlueSYSTEM family with wireless data transmission and a measuring range of ±1°.

• Measurement and alignment of vertical guideways
• Measurement and alignment of horizontal and vertical machine parts
• Comparison of horizontal and vertical guideways. The comparison of a left and a right vertical guideway is specifically interesting with the help of the additional vertical base on the right hand side of the instrument
• Squareness-measurement
• The wylerLEVEL / Frame can be integrated in any BlueSYSTEM by cable or by using the optional wireless connection with Bluetooth®

• Large and very easy-to-read color display
• Radio transmission, based on Bluetooth technology
• Various color profiles can be chosen
• Various display methods are available, e.g. bar graphs or spirit levels can be chosen
• All current units can be indicated
• Measuring range of ±20mm/m
• High precision due to the rugged, rust-protected housing made of cast iron with prismatic and scraped bases on the left hand and lower side of the housing, combined with an integrated temperature compensation
• Right hand base is precision ground
• Simple zero-adjustment with the integrated software and a reversal measurement
• Built-in cross vial for easy alignment of the vertical axis in order to avoid twist errors
• The wylerLEVEL / Frame is compatible with the full range of WYLER digital sensors
• Powered by standard 1.5V batteries, rechargeable batteries or with mains adapter
• Fulfils the strict CE requirements (immunity against electromagnetic smog)
• The instrument can be adjusted to local gravitation

• Magnetic inserts in the left hand vertical and the bottom horizontal base possible

 The inclination measuring instrument BlueCLINO High Precision can be delivered with an internationally recognised Calibration Certificate against a surcharge

• Clinometer
• High precision clinometer
• High precision inclinometer
• High precision inclination sensor
• Inclinometer
• digital inclination sensor
• digital inclinometer
• digital inclination measuring instrument
• inclination sensor

wylerLEVEL/wylerLEVEL Frame ±0.001mm/m

Dimensional drawing wylerLEVEL

Dimensional drawing wylerLEVEL Frame 160 mm

Dimensional drawing wylerLEVEL Frame 200 mm

Simple comparison of a left and a right vertical guideway

Application

wylerLEVEL/wylerLEVEL Frame ±0.001mm/m

MACHINE TOOLS / CHECKING OF ROTATION ERRORS

Subject:
Machine tools must be checked periodically for geometrical deviations, since changes of the geometry have a direct influence on the quality of the parts manufactured on that machine. 

It is very important that during the displacement in one axis the tool will follow a straight path compared to the table. On machines of light-weight construction the table can show a deformation due to its own weight. 

If the complete machine construction is tilting during the displacement of the table this is a sign for insufficient stability of the foundation or for a flexibility of the stand (damping elements).

Measuring task:
The geometry of a machine tool must be verified. The check must show rotational errors of the table during displacement. The measurement should be made reliably and efficiently.

 MORE

--------------------------------------------------------

CALIBRATION OF SURFACE PLATES (FLATNESS)

Subject:
The quality of granite references like surface plates, straight edges or squares must be checked and certified regularly.

Measuring task:
The measurement and calibration of granite master squares and surface plates should be performed efficiently. 

 MORE

--------------------------------------------------------

MEASUREMENT OF THE ABSOLUTE POSITION OF A Guideway

Subject:
The straightness of a guide way can be measured very easily and very precisely with the software wylerSPEC. Since the straightness is independent of the absolute position of the guide way in space, it is enough to measure “relative”. On the other hand, when adjusting a machine, it can be very helpful to know the exact position of the guide way in space.

Measuring task:
For a guide way, not only its straightness but also its deviation from the horizontal plane shall be measured. Furthermore, it should be shown where and how much the guideway should be corrected to adjust it horizontally.

 MORE

--------------------------------------------------------

 LARGE GRINDING MACHINE WITH FLAT GUIDEWAYS

Subject:
A manufacturer of large metal plates has several large surface grinding machines in his workshop. The geometry of these machines must be checked and documented periodically, and, where required, to be corrected. 

Measuring task:
On a surface grinding machine with 18-meter-long guideways, set 1.3m apart, the parallelism of the two guideways must be checked periodically. The guideways must be within a plane with a maximum tolerance (error) of less than 0.1 mm. The complete machine and its guideways can be adjusted by means of supporting screws placed at 750 mm intervals.

 MORE

--------------------------------------------------------

FLATNESS MEASUREMENT ON A CIRCULAR SUPPORT OF A TURN TABLE

Subject:
Module 4 of the software wylerSPEC allows users to determine the flatness of a rectangular surface very easily. The measurement of the flatness of a circular support though, as it is used for large machine tools, is much more complex. 

Measuring task:
The flatness of a circular support with a diameter of 2.3m must be determined.

 MORE

--------------------------------------------------------

MEASUREMENT OF A CIRCLE ON A ROUND TABLE OF A GRINDING MACHINE

Subject:
A manufacturer of large metal plates has several large surface grinding machines in his workshop. The geometry of these machines must be checked and documented periodically, and, where required, to be corrected.

Measuring task:
The flatness of a rotating table of a grinding machine with a diameter of 3200 mm must be measured. Thereby only the flatness of a circle must be measured and not the whole table.

 MORE

--------------------------------------------------------

MEASUREMENT OF PITCH AND ROLL ON A GRINDING MACHINE

Subject:
A manufacturer of large metal plates has several large surface grinding machines in his workshop. The geometry of these machines must be checked and documented periodically, and, where required, to be corrected.

Measuring task:
On a large surface grinding machine with guide ways with a length of 18m pitch and roll must be checked. The maximum tolerance is 0.1 mm/m.

 MORE

--------------------------------------------------------

MEASUREMENT OF THE RECTANGULARITY OF THE HEAD OF A ROUND TABLE GRINDING MACHINE

Subject:
A manufacturer of large metal plates has several large surface grinding machines in his workshop. The geometry of these machines must be checked and documented periodically, and, where required, to be corrected.

Measuring task:
The rectangularity of the axis of a grinding head of large grinding machine in relation to the bearing of a round table with a diameter of 3200 mm must be measured. Based on the results, if necessary, the inclination of the head must be adjusted.

 MORE