Bench hardness tester
AT130
Operating according to the Rockwell principle (ASTM E-18 - ISO6508) the AT130D series, is not influenced by deflections. The reference point for the measurements is the surface of the component itself. Surface preparation is needed only where the indentation takes place. With an easy actuation of the lever, the preload and load are applied. With the return movement, the additional load is removed, and the hardness is calculated. The complete test takes no more than 3 seconds (a few seconds longer for very soft materials).
| Working principle | MOD DR: Rockwell
MOD DSR: Superficial Rockwell |
| Standard scales | MOD DR:
Rockwell: HRA, HRB, HRC, HRD, HRF, HRG
Brinell: HB30
other scales on request
MOD DSR:
Rockwell: HR15N, HR30N, HR45N, HR15T, HR30T, HR45T
other scales on request |
| Loads | MOD R:
Rockwell 60kgf (N588.40) - 100kgf (N980.70) - 150kgf (N1471)
Brinell 62.5kgf (N612.90) - 125kgf (N1226) - 187.5kgf (N1839)
MOD SR:
Rockwell 15kgf (N147) - 30kgf (N294) - 45kgf (N441)
Brinell 62.5kgf (N612.90) |
| Preload | MOD DR: 10kgf (98.1N)
MOD DSR: 3kgf |
| Load time | selectable |
| Load application method | manual with automatic preload application |
| Minimum measurable diameter | 6mm Rockwell 4mm Rockwell superficiale |
| Working area dimensions | STAND TX: max. measurable height: 240mm (400mm w/o elevating screw) depth: 225mm
STAND NX: max. measurable height: 210mm / depth: 240mm |
| Selectable functions | scales, tolerances, calibration |
| Output interfaces | RS232 |
| Reading | on display |
| Languages | Italian, English, German, Other languages on request |
| Overall dimensions | AT130DNX : 30cm x 60cm x h73cm
AT130DTX : 30cm x 60cm x h95cm
AT130DCAR : 95cm x 33cm x h133cm
AT130DMUR : 30cm x 70cm x h110cm |
| Weight | AT130DNX : 95kg
AT130DTX : 125kg
AT130DCAR : 165kg
AT130DMUR : 115kg |
| Norms and certifications | Rockwell - ASTM E-18 - ISO6508 |
| Power supply | 115VAC or 230VAC |
